| SLIDES |
Component Features |
Application Parameters |
| Bridge Slide |
Bridge Slide for 12”-16” Split Frames |
Capable of single pointing, flange facing, counter boring, and deep boring. |
| |
Bridge Slide for 18”-24” Split Frames |
Bridge Slide units compatible with Split Frames from 12” to 36" |
| |
Bridge Slide for 26”-30” Split Frames |
|
| |
Bridge Slide for 32”-36” Split Frames |
|
| 4" Tool Slides |
Fits any size split frame. Slide can sever, bevel and hold counter bore attachments. Standard with Split Frames from 4” to 12”. Slide can bevel up to 1.625” pipe wall thickness standard Aggressive tooling. |
Requires a radial clearance of 6.25” from the outside diameter of pipe surface |
| 5" Tool Slides |
Fits any size split frame. Slide can sever, bevel and hold counter bore attachments. Standard with Split Frames from 14” and higher. Slide can bevel up to 1.625” pipe wall thickness using standard Aggressive tooling. |
Requires radial clearance of 7.25” from the outside diameter of pipe surface |
| 6" Tool Slides |
Fits any size split frame. Slide can sever bevel and hold counter bore attachments. Slide can bevel up to 1.625” pipe wall thickness using standard Aggressive tooling. |
Requires a radial clearance of 8.25” from the outside diameter of pipe surface |
| 10” Tool Slide |
Fits any size split frame. Slide can sever, bevel and hold counter bore attachments. |
Requires a radial clearance of 12.25” from the outside diameter of pipe surface |
| Heavy Wall Beveling Slide |
Fits any size split frame. Slide can bevel up to 2.5” pipe wall thickness. |
Requires a radial clearance of 8.25” from the outside diameter of pipe surface |
| Heavy Wall Severing Tool Slide |
Used for severing wall thickness over 3". Tool is 2" wide for extra rigidity. |
Requires a radial clearance of 8.25” from the outside diameter of pipe surface |
| Low Radial Clearance Tool Slide |
Fits any size split frame. Slide fits within the profile of the split frame for restricted radial clearance applications |
Requires a radial clearance of 4” from the outside diameter of pipe surface |
| Out of Round Slide |
Fits any size split frame. Compensation for up to 1” out-of-round pipe condition. |
Requires a radial clearance of 6” from the outside diameter of pipe surface |
| BORING ATTACHMENTS |
Features |
Application parameters |
| Fixed Counter Bore Attachment |
Standard Counter bore attachment. Mounts to any tool slide. |
Requires a linear clearance of 8” from face of split frame |
| Compound Geometry (CG) Counter Bore Attachment |
CG Counter Bore mounts to any tool slide*. Provides variable transition positions from center line to 30 degrees either direction. Graduated marking for angles and transition ratios. Adjustable depth up to 10”. |
SCB-1005 requires a linear clearance of 8” from face of split frame SCB-1008 requires a linear clearance of 11” from face of split frame |
| |
|
|
| MOTORS |
Features |
Application Parameters |
| Heavy Duty |
Compatible with any size split frame |
Recommended air source performance: 90psi and 90 cfm |
| Right Angle Motor Adapter |
Used with Heavy Duty Motors in a restricted space condition |
|
| Right Angle Motor |
Compatible with any size split frame. Used in restricted space conditions. Recommended for thin wall applications. |
|
| Front Drive Gear Box |
Relocates motor to front of machine in rear obstructed operating conditions |
|
| Hydraulic Motor |
Compatible with any size split frame. Used in conjunction with Aggressive Hydraulic Power Supply. Standard hose length 50’. Maximum hose length 100’. |
|